Price
- $35 to $45 (5)
- $45 to $250 (4)
Quantity
Product Color
Product Type
- Hook & Loop Fastener (4)
- Loop Fastener (2)
- Sticky Tape (2)
- Cable Tying (1)
Marketing Information
Roll. Not recommended for sewing purposes. 1"" x 75'.
(3)Stronger adhesive sticks to most surfaces. Water and temperature-resistant. For indoor or outdoor use.
(2)- Sticky Back Tape, the original hook-and-loop fastener, features simple peel-and-stick application. It is perfect for office, school, home and workshop use. Use on smooth surfaces including walls, glass, tile, plastic, metal and wood. Tape works with other VELCRO Brand fasteners or adheres to itself. (2)
Made of hooks and loops. For smooth surfaces. 3/4"" x 15'.
(1)- VELCRO® Brand Hook 88 adhesive backed fasteners are suitable for a wide range of applications thanks to the versatility and durability of synthetic nylon yarns. Ideal for indoor use. (1)
Tape Length
- 25 yd (22.9 m) (3)
- 10 ft (3 m) (2)
- 15 ft (4.6 m) (2)
- 0.75"" (19.1 mm) (1)
Tape Width
- 1"" (25.4 mm) (3)
- 0.75"" (19.1 mm) (2)
- 2"" (50.8 mm) (2)
Application/Usage
Features
Product Material
- Nylon (3)
- Acrylic
- Nylon
Durability
Additional Information
- Shape:
Roll
Care and Application:
Instructions:
- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbsFunctional Temperature Range:
0-100° F (-18-38° C)
(1) Shape:
Roll
Care and Application:
Instructions:
- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs
Functional Temperature Range:
0-100° F (-18-38° C)
(1)