Price
- $0 to $10 (3)
Additional Information
- Shape:
Roll
Care and Application:
Instructions:
- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbsFunctional Temperature Range:
0-100° F (-18-38° C)
(1) - Shape:
Circles
Care and Application:
Instructions:- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbsFunctional Temperature Range:
0-100° F (-18-38° C)
(1) - Shape:
Squares
Care and Application:
Instructions:- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs
Functional Temperature Range:
0-100° F (-18-38° C)
(1) Shape:
Roll
Care and Application:
Instructions:
- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs
Functional Temperature Range:
0-100° F (-18-38° C)
(1)Shape:
Strips
Care and Application:
Instructions:
- Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
- Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs
Functional Temperature Range:
0-100° F (-18-38° C)
(1)
Tape Length
- 15 ft (4.6 m) (2)
- 0.62"" (15.7 mm) (1)
- 0.88"" (22.2 mm) (1)
- 3.50"" (88.9 mm) (1)
Quantity
- 1 / Roll (2)
- 12 / Pack (1)
- 15 / Carton (1)
- 4 / Pack (1)
Marketing Information
- Sticky Back Tape, the original hook-and-loop fastener, features simple peel-and-stick application. It is perfect for office, school, home and workshop use. Use on smooth surfaces including walls, glass, tile, plastic, metal and wood. Tape works with other VELCRO Brand fasteners or adheres to itself. (2)
Hook and loop pressure sensitive fasteners have strong holding power, up to 5 lbs. (1 lb. per 1 square inch). They can be opened and closed thousands of times. Simple peel and stick application. For use indoors on smooth surfaces such as painted wallboard, glass, metal and most plastics.
(1)- Adhesive-backed round coins adhere to almost any smooth surface including walls, glass, tile and plastic. Use on walls, glass, tile, plastic or metal. Sticky Back Coins work with other fasteners or adheres to themselves. Simply peel and stick. (1)
- Adhesive-backed squares adhere to almost any smooth surface including walls, glass, tile and plastic. Use on walls, glass, tile, plastic or metal. Sticky Back Squares work with other fasteners or adheres to themselves. Simply peel and stick. (1)
Application/Usage
Tape Width
- 0.75"" (19.1 mm) (3)
- 0.62"" (15.7 mm) (1)
- 0.88"" (22.2 mm) (1)
Product Type
- Sticky Tape (3)
- Hook & Loop Fastener (2)
Product Color
Country of Origin
- United States (4)
- Mexico (1)